Cold storage operators can protect margins from rising power costs by managing refrigeration energy across their entire network of facilities as one coordinated portfolio, using consistent standards, shared data, and automated controls to shift load away from expensive hours and spread proven savings to every site. Because refrigeration runs around the clock and dominates a cold storage building’s energy use, even modest improvements applied consistently across many warehouses add up to meaningful savings. Portfolio-wide control turns energy from an unpredictable expense into a managed operating variable.
The pressure is building on both sides of the border. Electricity demand is climbing, prices for commercial and industrial customers are rising, and refrigerated warehouses sit among the most energy-intensive buildings in the logistics sector.
Why Power Costs Are Climbing
Several forces are pushing electricity prices upward across North America. Data centre construction, industrial electrification, and growing peak demand all compete for limited generation and grid capacity.
The U.S. Energy Information Administration’s Electric Power Monthly price data shows the average industrial electricity price reached 9.64 cents per kilowatt-hour in August 2026, compared with 8.98 cents in August 2025. Commercial customers paid an average of 14.47 cents per kilowatt-hour in August 2026, up from 13.87 cents a year earlier.
Demand growth suggests the pressure will continue. The EIA’s latest Short-Term Energy Outlook reports that U.S. electricity consumption in the third quarter of 2026 rose 4% compared with the same quarter a year earlier, and it expects demand from the industrial sector to increase by 2.7% in 2027.
The Canadian outlook
Canadian operators face a similar long-term trend. The Canada Energy Regulator’s 2026 Energy Futures fact sheet projects end-use electricity consumption rising 44% from 2023 to 2050 under current measures. The same scenario anticipates 1.5 GW of data centre load by 2030, adding new competition for power in several provinces.
Why Cold Storage Feels the Squeeze More Than Most
Refrigerated warehouses use far more energy per square foot than conventional storage. ENERGY STAR’s national median energy use table lists a median site energy use intensity of 84.1 kBtu per square foot for refrigerated warehouses, compared with 22.7 kBtu per square foot for non-refrigerated warehouses.
That intensity means electricity is one of the largest controllable costs in a cold storage business. When rates rise, margins tighten quickly, especially for operators with long-term storage contracts that do not adjust as fast as utility bills.
| Key figure
Refrigerated warehouses carry a median site energy use intensity of 84.1 kBtu per square foot, versus 22.7 kBtu per square foot for non-refrigerated warehouses, according to ENERGY STAR. Higher power prices hit cold storage harder as a result. |
Where cold storage energy goes
- Compressors: The largest electrical loads, running continuously to hold freezer and cooler temperatures.
- Condensers and fans: Rejecting heat outdoors, with performance that changes with weather.
- Evaporator fans and defrost: Moving cold air through storage rooms and clearing ice from coils.
- Dock and door losses: Warm, humid air entering through busy loading areas.
- Peak demand: Utility charges tied to the highest power draw in a billing period.
From Single-Site Fixes to Portfolio-Wide Control
Most operators have already pursued efficiency upgrades such as LED lighting and variable speed drives. Those projects help, but they are one-time improvements. The larger opportunity lies in how refrigeration systems are operated every hour, at every site.
Recent overviews of AI in industrial automation identify energy optimization and demand response as the most mature applications, with software layered over existing equipment instead of requiring replacement. For a cold storage company, that means using the refrigeration plants already in place more intelligently, timing cooling to match electricity prices and holding temperatures within safe limits throughout.
What portfolio-wide energy control involves
- One view of every site. Energy, temperature, and equipment data from every facility in a consistent format.
- Shared operating standards. Setpoints, sequences, and alarm rules applied consistently, with documented exceptions.
- Rate-aware operation. Refrigeration plans that respond to time-of-use pricing, demand charges, and weather.
- Load shifting. Pre-cooling product during lower-cost hours so equipment can run less during expensive peaks.
- Continuous verification. Tracking results so operators can confirm savings and catch performance drift.
The table below compares a site-by-site approach with a portfolio-wide one.
| Factor | Site-by-site management | Portfolio-wide energy control |
| — | — | — |
| Data | Different formats and naming at each facility | Common data model across all facilities |
| Best practices | Stay local to the site that found them | Copied to every comparable site |
| Response to rate changes | Manual and inconsistent | Coordinated and automated within limits |
| Peak demand management | Depends on local staff attention | Planned across the network |
| Visibility for finance | Monthly bills, after the fact | Ongoing tracking of energy cost drivers |
Protecting Product While Cutting Costs
The main reason operators hesitate to push energy savings is product risk. A warehouse that saves on electricity but allows temperatures to drift can lose inventory and customer trust. Effective energy control therefore depends on guardrails that keep every storage room within its approved range.
Operators should look for approaches that let local controllers keep handling real-time safety logic, while a higher-level layer optimizes timing and staging within strict limits. Clear visibility into what the system is doing, and the ability for staff to override it, builds confidence among the people responsible for product quality.
Building the Business Case
Energy programs that span many facilities need support from finance, operations, and engineering at the same time. Each group measures success differently, so the business case should speak to all three.
What finance teams want to see
Finance leaders usually focus on predictability as much as absolute savings. Tracking energy cost per pallet position or per unit of throughput, by site, makes it easier to forecast budgets and to show where improvements are coming from. A portfolio view also helps identify which facilities carry the greatest exposure to future rate increases.
What operations teams need
Operations leaders need confidence that energy work will not compromise temperatures, food safety, or customer commitments. They also need tools that reduce manual work instead of adding to it. Programs that give technicians better visibility and fewer nuisance alarms tend to gain support faster than those that only add new reporting duties.
A practical rollout sequence
- Start with two or three representative sites to establish baselines and confirm results.
- Standardize data and operating rules before scaling.
- Expand to the rest of the portfolio in phases, sharing results with site teams along the way.
- Revisit strategies whenever utilities change tariffs or introduce new programs.
Questions for finance and operations leaders
- How much of the total operating cost goes to electricity at each site, and how does that vary?
- Which facilities pay the highest demand charges, and why?
- Are proven savings strategies at one site being applied across the network?
- Can the company respond quickly when a utility changes rates or offers demand response programs?
The Bottom Line
Rising electricity prices and strong demand growth are reshaping the economics of cold storage in Canada and the United States. Operators that manage refrigeration energy as a coordinated portfolio, with consistent standards, shared data, and automated controls that respect temperature limits, can protect margins even as power costs climb. Those that continue to treat energy one building at a time will find it harder to keep pace.





